7063a

B7063A Otis Type Governor

The B7063A Governor is designed for use with non-preformed 8-strand steel wire rope.  That rope if needed, carries UNITEC identity: AAA712Q112C  This governor can be set to your desired pull-through force between 275 lbs and 825lbs

Contact UNITEC if you need to set for a force under the typical minimum of 275 lbs. we can determine if it is possible to set.

Before selecting your governor:

  1. Know your Elevator Contract Speed
  2. Know your present Sheave Diameter
  3. Know your governor rope diameter and length (if you want UNITEC to also quote the rope)
  4. Be familiar with your present PTF (PULL THRU FORCE) requirement.
  5. Be ready to provide either the original Otis Sales number, or if applying this to a non Otis application, provide that job number.

CAR GOVERNORS
B7063A21 B7063A GOVERNOR- 125FPM OR UNDER-CAR 823lb PTF
B7063A22 B7063A GOVERNOR- 125FPM OR UNDER-CAR 299lb PTF
B7063A23 B7063A GOVERNOR- 150 FPM CAR 823lb PTF
B7063A24 B7063A GOVERNOR- 150 FPM CAR 299lb PTF
B7063A25 B7063A GOVERNOR- 200 FPM CAR 823lb PTF
B7063A26 B7063A GOVERNOR- 200 FPM CAR 299lb PTF
B7063A27 B7063A GOVERNOR- 250 FPM CAR 823lb PTF
B7063A28 B7063A GOVERNOR- 250 FPM CAR 299lb PTF
B7063A29 B7063A GOVERNOR- 300 FPM CAR 823lb PTF
B7063A30 B7063A GOVERNOR- 300 FPM CAR 299lb PTF
B7063A31 B7063A GOVERNOR- 350 FPM CAR 823lb PTF
B7063A32 B7063A GOVERNOR- 350 FPM CAR 299lb PTF

COUNTERWEIGHT GOVERNORS
B7063A33 B7063A GOVERNOR- 125 FPM CWT 823lb PTF
B7063A34 B7063A GOVERNOR- 125 FPM CWT 299lb PTF
B7063A35 B7063A GOVERNOR- 150 FPM CWT 823lb PTF
B7063A36 B7063A GOVERNOR- 150 FPM CWT 299lb PTF
B7063A37 B7063A GOVERNOR- 200 FPM CWT 823lb PTF
B7063A38 B7063A GOVERNOR- 200 FPM CWT 299lb PTF
B7063A39 B7063A GOVERNOR- 250 FPM CWT 823lb PTF
B7063A40 B7063A GOVERNOR- 250 FPM CWT 299lb PTF
B7063A41 B7063A GOVERNOR- 300 FPM CWT 823lb PTF
B7063A42 B7063A GOVERNOR- 300 FPM CWT 299lb PTF
B7063A43 B7063A GOVERNOR- 350 FPM CWT 823lb PTF
B7063A44 B7063A GOVERNOR- 350 FPM CWT 299lb PTF

Final Governor Part numbers are special order and will appear as:
(for example: a car governor for 350fpm unit, ~ 825lb pull thru force with Sales number of 123456)

You the customer should ask for, and UNITEC will quote you Special order p/n: B7063A31-123456

Shown below is a Governor Deflector Stand (AAA20602E2). This device would only be needed if you were replacing a Governor having a 16/16.5” sheave diameter with the above mentioned B7063A governor. This would deflect the one rope from a 12” governor out to the position of a 16” sheave former application. [Note: an example of that path would be going from an Otis EA Flyball Governor (having a ~16” Governor sheave & ½” rope) to the B7063A (12” governor- needing to utilize 3/8” rope) ].

To perform that change and deflect the rope to the proper rope drop position, 3 items would be needed:
One AAA20602E2 GDS
One B7063A_ - xxxxxx Governor
One AAA712Q112C 3/8” Governor Rope

No warranty holds if an old Governor rope is kept in place and run on a new governor sheave

9 Items

Part Finder chevron-down